Once I rounded up all of the necessary bolts, nuts and washers, the install of the chairs went smoothly. On the passenger seat, I was able to reuse the previous holes for the old pedestal since they aligned with the new pedestal. The Captain's side was a whole different story. I filled the old holes and was only able to reuse one of the previous holes. I drilled the other holes and fastened down the pedestal. The chair bolted to the plate on top of the pedestal and everything aligned perfectly. The chairs rotate as well as slide back and forth and they lock. Once the passenger chair was installed, I was able to reassemble the drawers and insert and place back into the compartment.